Description

YXL10

YXL 10-inch / 1-inch – 300 Watts – Passive Cabinet
The YXL cabinets use a single driver and 90 x 40 degree horn with 1-inch throat and 1-inch compression driver. Constructed from strong Polypropylene, YXL is poised to uphold Yorkville’s reputation for reliability and durability. The cabinets can be positioned upright or used as a monitor wedge.

Features
300 Watts (Program)
8 Ohms
10-inch woofer with 2-inch voice coil
1-inch compression driver
90° x 40° HF dispersion
Polypropylene cabinet construction
Specifications
System Type Passive Loudspeaker
Active or Passive Passive
Power Rating (Watts) 300 Watts Program
Sensitivity (dB @1Watt/1m) 97dB
Max SPL (dB) 122dB Continuous
Frequency Response (Hz +/- 3dB) 55 – 16k (Hz +/-3dB)
Dispersion (°H x °V) 90 x 40
Crossover Frequency (Hz) 1.6kHz
HF Horn Integrated into Baffle
LF Driver(s) 10-inch (2-inch voice coil)
Feet Rubber
Bar Handles 1 x Side / 1 x Back
Flying Hardware 2 (Top)
Optional Flying Hardware Yes
Enclosure Materials Polypropylene, Metal grille
Baffle Material Polypropylene
Grille Powder Coated Steel with Grille Cloth
Other Details Rubber feet on bottom and side with the monitor Wedge
Dimensions (DWH xbackW, inches) 11 x 13.25 x 20.5
Dimensions (DWH xbackW, cm) 28 x 33.5 x 52
Weight (lbs/kg) 29.9 / 13.6
Specifications subject to change without notice

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Power Matrix

Recommended for: Portable PA.

Features
Stereo/parallel/bridge-mono mode
User selectable input sensitivity – 0.775V and 1.4V
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference

Specifications
Frequency Response 20 Hz – 20 kHz, +0/-1 dB (at 1 watt)
THD <0.5%, 20 Hz – 20 kHz
Intermodulation Distortion =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate >10V/us
Voltage Gain 36 dB
Damping Factor (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted) >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz -75 dB, -59 dB
Input Sensitivity (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced) 20kΩ, 10kΩ
AC Line Voltage and Frequency Configurations Available (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
Dimensions 19″ x 3.5″ x 14.4″ (48.3cm x 8.9cm x 36.6cm)
Weight 43lbs (19.5kg)
IEC Power Connector 15A